If you are researching driveways in Reigate, you probably want three straight answers: what it will cost, which surface is right for your home, and who can build it so it lasts. This guide gives you all three with up-to-date 2026 figures, and at Titan Driveways & Patios we design and install engineered driveways across Reigate, Reigate Heath, Woodhatch, Meadvale and the wider RH2 area, built for the local ground and finished to last.
Reigate is a distinctive place to build a driveway. The town sits on the Lower Greensand ridge, with the chalk of the North Downs rising to the north and bands of Gault clay to the south. That means sandy, free-draining ground in some streets and heavy, moving clay in others, often within the same neighbourhood. A driveway laid without accounting for this will crack, rut or pool with water within a few winters, which is exactly why proper groundwork matters more here than the surface on top.
Why Reigate Driveways Need Local Engineering
The ground beneath Reigate explains why so many older driveways fail early. The British Geological Survey maps the area across the Folkestone and Sandgate Formations (the famous Reigate greensand) with Gault clay to the south. Sandy greensand can wash out and lose support if it is not properly contained, while clay swells when wet and shrinks when dry, a constant movement cycle that lifts and cracks anything built on a weak base.
We never use a generic install. Every Reigate driveway starts with a site survey to assess soil type, gradient, existing drainage and how you use the space, and we specify excavation depth and sub-base build-up to suit that specific plot. The result is a driveway engineered for your property rather than a surface that looks good for one season and fails the next.
How Much Does a Driveway Cost in Reigate in 2026?
Cost is the first question most homeowners ask, so here are current figures rather than vague ranges. UK cost guides from Checkatrade and the Federation of Master Builders put 2026 prices roughly as follows, and note that London and the South-East which includes Reigate typically adds 20–30% to baseline rates:
| Surface | Typical cost per m² (2026) | Best for |
|---|---|---|
| Gravel | £25–£50 | Budget, naturally permeable, period homes |
| Tarmac | £45–£75 | Larger drives, value, shared accesses |
| Block paving | £75–£140 | Kerb appeal, strength, easy repairs |
| Resin-bound | £85–£135 | Modern seamless finish, SuDS compliance |
As a rule of thumb, a typical 40m² driveway costs somewhere between £2,000 and £5,500 for the surface, before groundworks. Correct sub-base preparation and drainage usually add £600–£1,500 and are not optional for a quality install, while a new dropped kerb can add £800–£2,500. In practice, most complete Reigate driveways for one to two cars fall between roughly £3,000 and £9,000 depending on size, material and access. We give you a clear, fixed written quote after a free survey, no deposit and no hidden extras, so you know the real number before committing.
Does a New Driveway Add Value to a Reigate Home?
Yes and in a commuter town like Reigate, where on-street parking is tight in many roads, it can be one of the smartest upgrades you make. Industry estimates put the uplift from a well-built driveway with off-street parking at around 5–10% of a property’s value, with a single space adding up to 5% and a second space pushing towards 10%. Just as importantly, a crisp, well-drained driveway signals a cared-for home to buyers, while a cracked or weed-strewn surface does the opposite. Because we build to last rather than to a price, that value holds for years.
Choosing the Right Driveway Material in Reigate
Block paving is the enduring favourite for block paving driveways, prized for its strength, wide colour range and the fact that individual blocks can be lifted and re-laid for repairs. Resin-bound surfacing is the modern, seamless choice; a resin-bound driveway is fully permeable and therefore naturally SuDS-compliant, low-maintenance and excellent at managing rainfall on Reigate’s varied ground.
Tarmac gives great value and a clean, uniform look for larger driveways; our tarmac driveways are laid hot over a properly prepared base. Gravel is the most affordable and naturally permeable option, and our gravel driveways can be stabilised with a grid to stop migration. If your existing surface is worn rather than failed, our driveway repair service can restore it for far less than a full replacement.
Planning Permission, SuDS and Conservation Areas in Reigate
Most front driveways in Reigate do not need planning permission, but one rule is essential. Under national Sustainable Drainage (SuDS) guidance explained by the Planning Portal, surfacing more than five square metres of your front garden means you must either use a permeable material such as resin-bound or gravel, or direct rainfall to a permeable area or soakaway within your boundary.
Reigate falls under Reigate & Banstead Borough Council for planning, and parts of the town centre lie within designated conservation areas where material and appearance can be more tightly controlled worth checking before you choose a surface. A new vehicle crossover (dropped kerb) must be approved by Surrey County Council as the local highway authority. We design every driveway to meet these requirements and guide you through the dropped-kerb process so the project stays fully compliant.
How We Build Driveways That Last
Our reputation rests on getting the groundwork right. Every Reigate driveway follows a proven process aligned with UK construction best practice and the British Standard for paving, BS 7533. We excavate to the required depth and remove unstable soil, lay a geo-textile membrane, then install and mechanically compact a minimum 100–150mm MOT Type 1 sub-base in layers. Your chosen surface is laid to precise levels with the correct falls, so water runs to a soakaway, channel drain or permeable area rather than towards your home or the road. Finally, we secure the edges, finish the joints and complete a full clean-down and inspection. Most driveways take three to five working days, and you have one point of contact throughout.
Driveway Installation Across Reigate and the RH2 Area
We install driveways right across Reigate and the surrounding RH2 postcode, including Reigate Heath, Woodhatch, Meadvale, South Park and the roads climbing towards the North Downs, as well as neighbouring Redhill. Local knowledge genuinely matters here: a property on the sandy greensand near Reigate Heath needs a different drainage approach to a clay-heavy plot towards Woodhatch, and a home within a conservation area may need a specific material or finish. Because we survey every site in person and know how Reigate’s ground behaves through a wet Surrey winter, we can specify the right build-up first time rather than returning to fix pooling, movement or cracking a few years down the line.
Why Choose Titan Driveways & Patios in Reigate
We are a fully insured, family-run team trusted across Reigate, Redhill, Caterham, Coulsdon and Warlingham. We never subcontract your project, we build to British Standards, and every installation carries a 10-year workmanship guarantee. You deal with the same people from quote to completion, we take no deposit, and we always leave your property clean and tidy. To judge our standard for yourself, browse our project gallery.
Frequently Asked Questions About Driveways in Reigate
How much does a new driveway cost in Reigate?
As a 2026 guide, surfaces range from about £25–£50 per m² for gravel and £45–£75 for tarmac up to £75–£140 for block paving and £85–£135 for resin-bound, with groundworks and any dropped kerb on top. Most complete Reigate driveways for one to two cars fall between roughly £3,000 and £9,000. We provide a fixed written quote after a free survey.
Do I need planning permission for a driveway in Reigate?
Usually not, as long as the surface is permeable or drains to a soakaway within your property under SuDS rules. Permission or extra care may apply in conservation areas, for larger non-permeable surfaces, or for a new dropped kerb, which we arrange with Surrey County Council.
Which driveway material is best for Reigate’s greensand and clay soil?
Resin-bound and block paving both perform very well over a correctly engineered, well-contained sub-base, which stabilises sandy greensand and manages the movement of clay. We recommend the best option for your specific plot at the survey stage.
How long does it take to install a driveway in Reigate?
Most domestic driveways are completed within three to five working days, depending on the size of the area, the material chosen and the amount of excavation and drainage work involved. We confirm a clear schedule before starting.
Get a Free Quote for Driveways in Reigate
If you are ready to invest in a driveway built properly from the ground up, Titan Driveways & Patios are here to help. We offer free, no-obligation site surveys across Reigate and the surrounding RH2 area. Call 0188 3338 335, phone 0189 224 9077 or 0749 140 2564, or email info@titandrivewaysandpatios.co.uk. You can also contact us here to book your survey.